CLI Commands: Base
116
4.6
Management Commands
CLI L2P
Release
7.0
05/2011
4.6.23 ethernet-ip
This command controls the EtherNet/IP function on the switch.
Detailed information you can find in the User Manual Industrial Protocols.
Default
depends on the order code (standard = disable)
Format
ethernet-ip admin-state {enable | disable}
Mode
Global Config
Admin-state
disable Disables the EtherNet/IP function on this device.
Note: the relevant MIB objects are still accessible.
enable Enables the EtherNet/IP function on this device.
4.6.24 network javascriptmode
When the user accesses the switch’s web interface, the switch’s web server
will deliver a HTML page that contains JavaScript.
Default
enabled
Format
network javascriptmode
Mode
Privileged EXEC
U no network javascriptmode
When the user accesses the switch’s web interface, the switch’s web
server will deliver a HTML page that contains no JavaScript.
To Next Page
Loading...
Need help?
General
