Hirschmann MACH 1000 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.6 Management Commands
147
4.6.62 snmp-server enable traps l2redundancy
Indicates whether traps that are related to the layer 2 redundancy features of
the switch will be sent. The HiPER-Ring and the Redundant Coupling will tell
you with these traps when the main line has become inoperative or returned.
May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps l2redundancy
Mode
Global Config
U no snmp-server enable traps l2redundancy
This command disables layer 2 redundancy traps for the entire switch.
Format
no snmp-server enable traps l2redundancy
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English