Hirschmann MACH 1000

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.3 HIPER-Ring
445
5.3.5 hiper-ring port secondary
Enter the switch's secondary HIPER Ring port.
Default
n/a not set
Format
hiper-ring port secondary <secondary ring port>
Mode
Global Config
secondary ring port
Enter the switch's secondary HIPER Ring port (<slot/port>).
5.3.6 hiper-ring recovery-delay
Defines the maximum recovery delay of ring recovery in the HIPER Ring
(500 or 300 ms).
Default
n/a not set
Format
hiper-ring recovery-delay (<500/300>)
Mode
Global Config