198
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.35 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on all interfac-
es. If an interface which has GARP enabled is enabled for routing or is enlist-
ed as a member of a link-aggregation (LAG), GARP functionality will be
disabled on that interface. GARP functionality will subsequently be re-en-
abled if routing is disabled and link-aggregation (LAG) membership is re-
moved from an interface that has GARP enabled.
Default
disabled
Format
set gmrp interfacemode
Mode
Global Config
U no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a
selected interface.
Format
no set gmrp interfacemode
Mode
Global Config
To Next Page
Loading...
Need help?
General
