CLI Commands: Security
538
6.2
HTTP Commands
CLI L2P
Release
7.0
05/2011
6.2.4 show ip http
This command displays the http settings for the switch.
Format
show ip http
Mode
Privileged EXEC and User EXEC
Secure-Server Administrative Mode
This field indicates whether the administrative mode of secure HTTP
is enabled or disabled.
Secure Protocol Level
The protocol level may have the values of SSL3, TSL1, or both SSL3
and TSL1.
Secure Port
This field specifies the port configured for SSLT.
HTTP Mode
THis field indicates whether the HTTP mode is enabled or disabled.
To Next Page
Loading...
Need help?
General
