380
4.16
PoE+ - Power over Ethernet Plus
CLI L2P
Release
7.0
05/2011
Reserved Power
Shows the maximum power which the device provides for all PoE+
devices together which are connected to the PoE+ module, based on
their classification.
Delivered Power
Shows the current demand for power on all PoE+ ports of the module
(valid range: 0 - 248 W).
Send Traps
Shows, if the function is enabled/disabled. If send traps is enabled,
the device will send a trap if the power threshold exceeds or falls
below the power limit or if the PoE+ power supply is switched on/off
on one or more ports.
Power Threshold
Power threshold in per cent of the nominal power. If the power is
exceeding/falling below this threshold, the device will send a trap.
4.16.2 inlinepower budget slot
Configure the available power budget per slot in Watts.
Format
inlinepower budget slot <slot> <0..1000>
Mode
Global Config
Slot
For MACH102 devices with M1-8TP-RJ45 PoEP media modules:
Slot = Slot number of the PoE+ module (valid range: 1 - 2)
For MACH104-16TX-PoEP devices: Slot = 1
To Next Page
Loading...
Need help?
General
