Hirschmann MACH 1000

312
4.12 LLDP - Link Layer Discovery Protocol
CLI L2P
Release 7.0 05/2011
4.12.13show lldp med interface
Use this command to display a summary of the current LLDP MED configu-
ration for a specific interface.
Format
show lldp med interface {<unit/slot/port> | all}
Mode
Privileged EXEC
<unit/slot/port>
Indicates a specific physical interface.
all
Indicates all valid LLDP interfaces.
Interface
Displays the physical interface.
Link
Displays the link status. Value range: Up, Down.
configMED
Displays if confignotification for the Media Endpoint Devices is
Enabled/Disabled.
operMED
Displays if operation for the Media Endpoint Devices is
Enabled/Disabled.
ConfigNotify
Displays the ConfigNotify. Value range: Enabled, Disabled.
TLVsTx
Displays the TLVsTx.