CLI Commands: Switching
434
5.2
MRP
CLI L2P
Release
7.0
05/2011
5.2.3 mrp current-domain
Specify that you want to configure the current MRP domain's settings.
Default
none
Format
mrp current-domain {advanced-mode {disable|enable}
| manager-priority <0-65535>
| mode {client|manager} | name <domain-name>
| recovery-delay {500ms|200ms}
| operation {disable|enable}
| port {primary|secondary} <slot/port>
| vlan <0-4042>}
Mode
Global Config
advanced-mode
Enable or disable the switch's advanced mode for the given MRP
domain.
manager-priority
Configure the given MRP domain's manager priority (0-65535).
mode
Configure the switch's MRP mode for the given domain (client or
manager).
client: Switch is client for the given MRP domain.
manager: Switch is manager for the given MRP domain.
name
Set a name for the given MRP domain.
recovery-delay
Configure the MRP recovery delay for the given domain.
500ms: Recovery delay is 500 ms for the given MRP domain.
200ms: Recovery delay is 200 ms for the given MRP domain.
operation
Enable or disable the switch for the given MRP domain.
To Next Page
Loading...
Need help?
General
