316
4.12
LLDP - Link Layer Discovery Protocol
CLI L2P
Release
7.0
05/2011
summary
Display remote data in summary format (table with most important
data only, strings will be truncated if necessary, indicated by an
appended '>' character).
sys-desc
Display the remote data's system description only.
sys-name
Display the remote data's system name only.
vlan-info
Display the remote data's VLAN information only (group command,
outputs: Port VLAN ID, Membership VLAN IDs and their respective
names).
4.12.18lldp
Enable/disable the LLDP/IEEE802.1AB functionality on this device. If dis-
abled, the LLDP protocol will become inactive, but the LLDP MIBs can still be
accessed. This command is a shorthand notation for lldp config chas-
sis admin-state {off|on} (see “lldp config chassis admin-state” on
page 317).
The default setting is on.
Format
lldp
Mode
Global Config
U no lldp
Disable the LLDP/IEEE802.1AB functionality on this device.
To Next Page
Loading...
Need help?
General
