CLI Commands: Base
88
4.4
Class of Service (CoS) Commands
CLI L2P
Release
7.0
05/2011
4.4.6 show classofservice trust
This command displays the current trust mode for the specified interface.
The slot/port parameter is optional. If specified, the trust mode of the inter-
face is displayed. If omitted, the most recent global configuration settings are
displayed.
Format
show classofservice trust [slot/port]
Mode
Privileged EXEC
Class of Service Trust Mode
The current trust mode: Dot1p, IP DSCP, or Untrusted.
Untrusted Traffic Class
The traffic class used for all untrusted traffic. This is only displayed
when the COS trust mode is set to 'untrusted'.
slot/port
Valid slot and port number separated by forward slashes.
To Next Page
Loading...
Need help?
General
