Hirschmann MACH 1000 Reference Manual

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.1 Spanning Tree Commands
407
5.1.9 spanning-tree
This command sets the spanning-tree operational mode to enabled.
Default
disabled
Format
spanning-tree
Mode
Global Config
U no spanning-tree
This command sets the spanning-tree operational mode to disabled.
While disabled, the spanning-tree configuration is retained and can be
changed, but is not activated.
Format
no spanning-tree
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English