CLI Commands: Security
506
6.1
Security Commands
CLI L2P
Release
7.0
05/2011
6.1.17 dot1x safe-vlan
Use this command to enable the safe-vlan assignment on the switch.
This command is available for the RS20/RS30/RS40, RSB20, MS20/MS30,
RSR20/RSR30, MACH100, MACH 1000, PowerMICE, MACH 4000,
OCTOPUS devices.
Default
disabled
Format
dot1x safe-vlan
Mode
Global Config
U no dot1x safe-vlan
Use this command to disable the safe-vlan assignment on the switch.
Default
disabled
Format
no dot1x safe-vlan
Mode
Global Config