EasyManuals Logo

Hirschmann MACH 1000 Reference Manual

Hirschmann MACH 1000
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #477 background imageLoading...
Page #477 background image
CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.8
DHCP Server Commands
477
5.8.8 dhcp-server pool modify <id> mode
Add or delete one or more pool modes.
Format
dhcp-server pool modify <id> mode
{interface {all | <slot/port>}
1)
|mac {none | <macaddr>}
1)
|clientid {none | <clientid>}
1)
|relay {none | <ipaddr>}
|remoteid {none | <remoteid>}
1)
|circuitid {none | < circuitid >}
1)
}
Mode
Global Config
dhcp-server pool modify <id> mode interface all
1)
Set pool to all interfaces.
dhcp-server pool modify <id> mode interface <slot/port>
1)
Set pool to a specific interface.
dhcp-server pool modify <id> mode mac none
1)
Use none to remove the mode.
dhcp-server pool modify <id> mode mac <macaddr>
1)
Enter macaddr in xx:xx:xx:xx:xx:xx format.
dhcp-server pool modify <id> mode clientid none
1)
Use none to remove the mode.
dhcp-server pool modify <id> mode clientid <clientid>
1)
Enter clientid in xx:xx:...:xx format.
dhcp-server pool modify <id> mode relay none
Use none to remove the mode.
dhcp-server pool modify <id> mode relay <ipaddr>
Enter IP address of the relay.

Table of Contents

Other manuals for Hirschmann MACH 1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann MACH 1000 and is the answer not in the manual?

Hirschmann MACH 1000 Specifications

General IconGeneral
BrandHirschmann
ModelMACH 1000
CategorySwitch
LanguageEnglish

Related product manuals