Hirschmann MACH 1000

CLI Commands: Switching
478
5.8 DHCP Server Commands
CLI L2P
Release 7.0 05/2011
dhcp-server pool modify <id> mode remoteid none
1)
Use none to remove the mode.
dhcp-server pool modify <id> mode remoteid <remoteid>
1)
Enter remoteid in xx:xx:...:xx format.
dhcp-server pool modify <id> mode circuitid none
1)
Use none to remove the mode.
dhcp-server pool modify <id> mode circuitid <circuitid>
1)
Enter circuitid in xx:xx:...:xx format.
1)
Available for pools with single IP address only.