Hirschmann MACH 1000 Reference Manual

CLI Commands: Switching
442
5.3 HIPER-Ring
CLI L2P
Release 7.0 05/2011
5.3.1 show hiper-ring
This command displays the settings and states of the HIPER-Ring. The fol-
lowing details are displayed on execution of the command.
Format
show hiper-ring
{info | mode | port [primary | secondary] |
redundancy-state | rm-state | recovery-delay}
Mode
Privileged EXEC and User EXEC
info
Display the information about the HIPER-Ring configuration (cabling).
mode
Display the HIPER-Ring mode settings.
port
Display the HIPER-Ring's primary and secondary port properties.
port primary
Display the HIPER Ring's primary port properties.
port secondary
Display the HIPER Ring's secondary port properties.
redundancy-state
Display the actual state of the HIPER-Ring redundancy.
rm-state
Display the state of the HIPER Ring redundancy manager.
recovery-delay
Display the value of the recovery delay.

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English