CLI Commands: Base
90
4.4
Class of Service (CoS) Commands
CLI L2P
Release
7.0
05/2011
4.4.9 dvlan-tunnel ethertype
This command configures the ethertype for all core ports. The ethertype may
have the values of 802.1q, vMAN or custom. The configured ethertype is
used for VLAN classification on all ports which are configured as core ports.
This command is available for the RS20/RS30/RS40, RSB20, MS20/MS30,
RSR20/RSR30, MACH100, MACH104, MACH1000, MACH1040,
MACH4002-24G/48G (XG), OCTOPUS, OS20/OS30 devices.
Default
802.1Q
Format
dvlan-tunnel ethertype
{802.1Q | vman | custom <0-65535>}
Mode
Global Config
802.1Q
Configure the etherType as 0x8100.
custom
Custom configure the etherType for the DVlan tunnel.
Range for the optional value of the custom ethertype: 0 to 65535.
vman
Configure the etherType as 0x88A8.
To Next Page
Loading...
Need help?
General
