Hirschmann MACH 1000 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
499
6.1.8 dot1x initialize
This command begins the initialization sequence on the specified port. This
command is only valid if the control mode for the specified port is 'auto'. If the
control mode is not 'auto' an error will be returned.
Format
dot1x initialize <slot/port>
Mode
Privileged EXEC
6.1.9 dot1x login
This command assigns the specified authentication login list to the specified user for
802.1X port security. The <user> parameter must be a configured user and the <list-
name> parameter must be a configured authentication login list.
Format
dot1x login <user> <listname>
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English