Hirschmann MACH 1000

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.9 Sub-Ring Commands
483
5.9 Sub-Ring Commands
These commands configure the sub-ring parameters.
The commands are divided by functionality into these different groups:
D Configuration commands are used to configure features and options of
the switch. For every configuration command there is a show command
that will display the configuration setting.
D Show commands are used to display switch settings, statistics and other
information.
5.9.1 show sub-ring
Display sub-ring information for all sub-rings or detailed information for a
specific sub-ring.
Format
show sub-ring {all-ids | <id>}
{id | info | mode | operation | protocol | port |
summary | ring-name | vlan | mrp-domainID |
partner-mac}
Mode
Privileged EXEC and User EXEC
show sub-ring
Display the sub-ring information.
show sub-ring all-ids
Display the sub-ring information for all existing Sub-Ring IDs.
show sub-ring <id>
Display the sub-ring information for the specified ID.
id
Display the given Sub-Ring's ID.