CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.6
Management Commands
129
4.6.40 show serial
This command displays serial communication settings for the switch.
Format
show serial
Mode
Privileged EXEC and User EXEC
Serial Port Login Timeout (minutes)
Specifies the time, in minutes, of inactivity on a Serial port connection,
after which the Switch will close the connection. Any numeric value
between 0 and 160 is allowed, the factory default is 5. A value of 0
disables the timeout.
4.6.41 show snmp-access
This command displays SNMP access information related to global and
SNMP version settings. SNMPv3 is always enabled.
Format
show snmp-access
Mode
Privileged EXEC
To Next Page
Loading...
Need help?
General
