250
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.94 vlan0-transparent-mode
Activate the “Transparent Mode“ to be able to switch priority tagged frames
without a VLAN affiliation thus with VLAN-ID “0”.
In this mode the VLAN-ID “0” persists in the frame, irrespective of the Port
VLAN ID setting in the “VLAN Port“ dialog.
Note for PowerMICE, MACH100, MACH 1000 and MACH 4000:
In transparency mode devices ignore received vlan tags. Set the vlan mem-
bership of the ports to untagged for all vlans.
Note for RS20/RS30/RS40, MS20/MS30 and OCTOPUS:
In transparency mode devices ignore the configured port vlan id. Set the vlan
membership of the ports from vlan 1 to untagged or member.
Format
vlan0-transparent-mode {disable|enable}
Mode
VLAN database
To Next Page
Loading...
Need help?
General
