CLI Commands: Switching
464
5.6
Port Security
CLI L2P
Release
7.0
05/2011
5.6.7 port-sec allowed-ip remove
Enter the allowed IP source address for this port, format: nnn.nnn.nnn.nnn
(nnn: decimal number 0..255) (up to 50).
Format
port-sec allowed-ip remove <IP Address 1>
<IP Address 2> ... <IP Address 50>
Mode
Interface Config
5.6.8 port-sec allowed-mac
Enter the allowed MAC source address for this port, format:
nn:nn:nn:nn:nn:nn (n: hexadecimal digit) or format: nn:nn:nn:nn:nn:nn/m
(n: hexadecimal digit) (m: decimal digit (1..48)) (up to 10).
Format
port-sec allowed-mac <MAC Address 1>
<MAC Address 2> ... <MAC Address 10>
Mode
Interface Config