Hirschmann MACH 1000

326
4.12 LLDP - Link Layer Discovery Protocol
CLI L2P
Release 7.0 05/2011
4.12.35lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in
the LLDP-MED set will be transmitted in the Link Layer Discovery Protocol
Data Units (LLDPDUs).
Default
By default, the capabilities and network policy
TLVs are included.
Format
lldp med transmit-tlv [capabilities]
[network-policy]
Mode
Interface Config
capabilities
Include/Exclude LLDP capabilities TLV.
network-policy
Include/Exclude LLDP network policy TLV.
U no lldp med transmit-tlv
Use this command to remove a TLV.
Format
no lldp med transmit-tlv [capabilities]
[network-policy]
Mode
Interface Config