Hirschmann MACH 1000 Reference Manual

CLI Commands: Base
148
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.63 snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When en-
abled, link traps are sent only if the Link Trap flag setting associated with the
port is enabled (see ‘snmp trap link-status’ command).
Default
enabled
Format
snmp-server enable traps linkmode
Mode
Global Config
U no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
Format
no snmp-server enable traps linkmode
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English