CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
225
4.9.65 show monitor session
This command displays the Port monitoring information for the system.
Format
show monitor session <Session Number>
Mode
Privileged EXEC and User EXEC
Session
Display port monitor session settings.
Session Number
Session Number. Enter 1 for the Session Number.
Port Monitor Mode
indicates whether the Port Monitoring feature is enabled or disabled.
The possible values are enable and disable.
Probe Port slot/port
is the slot/port configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.
Monitored Port slot/port
is the slot/port configured as the monitored port. If this value has not
been configured, 'Not Configured' will be displayed.
To Next Page
Loading...
Need help?
General
