Hirschmann MACH 1000 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.6 Management Commands
139
4.6.52 snmp-server contact
This command adds a new SNMP server contact.
Format
snmp-server contact <con>
Mode
Global Config
con
Enter system contact up to 63 characters in length.
If the name contains spaces, enclose it in quotation marks (").
U no snmp-server contact
This command removes this SNMP server contact from the table.
<con> is the SNMP server contact to be deleted.
Format
no snmp-server contact <con>
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English