Appendix- VLAN Example
CLI L2P
Release
7.0
05/2011
7.2
SOLUTION 2
543
7.2 SOLUTION 2
The network card configuration for devices on Project A, B and C should be
set to NOT tag traffic.
To take care of these untagged frames configure the following:
D vlan pvid 2 (in interface 0/1)
D vlan pvid 2 (in interface 0/2)
D vlan pvid 3 (in interface 0/3)
D vlan pvid 3 (in interface 0/4)
D vlan pvid 4 (in interface 0/5)
D vlan pvid 4 (in interface 0/6)
To Next Page
Loading...
