Hirschmann MACH 1000 Reference Manual

248
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.92 storm-control flowcontrol per port
This command enables 802.3x flow control for the port.
Note: This command only applies to full-duplex mode ports.
Default
enabled
Format
storm-control flowcontrol
Mode
Interface Config
U no storm-control flowcontrol per port
This command disables 802.3x flow control for the port.
Note: This command only applies to full-duplex mode ports.
Format
no storm-control flowcontrol
Mode
Interface Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English