CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
251
4.9.95 vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN
Only mode, untagged frames or priority frames received on this interface are
discarded. For Admit All mode, untagged frames or priority frames received
on this interface are accepted and assigned the value of the interface VLAN
ID for this port. With either option, VLAN tagged frames are forwarded in ac-
cordance with the IEEE 802.1Q VLAN Specification.
Default
Admit All
Format
vlan acceptframe <vlanonly | all>
Mode
Interface Config
U no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit
All. For Admit All mode, untagged frames or priority frames received on
this interface are accepted and assigned the value of the interface VLAN
ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Format
vlan acceptframe <vlanonly | all>
Mode
Interface Config
To Next Page
Loading...
Need help?
General
