Hirschmann MACH 1000 Reference Manual

CLI Commands: Switching
418
5.1 Spanning Tree Commands
CLI L2P
Release 7.0 05/2011
5.1.20 spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common
and internal spanning tree. The hellotime <value> is in whole seconds within
a range of 1 to 2 with the value being less than or equal to
"(Bridge Max Age / 2) - 1".
Default
2
Format
spanning-tree hello-time <1-2>
Mode
Interface Config
Global Config
U no spanning-tree hello-time
This command sets the Hello Time parameter for the common and
internal spanning tree to the default value, i.e. 2.
Format
no spanning-tree hello-time
Mode
Interface Config
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English