364
4.14
PTP - Precision Time Protocol
CLI L2P
Release
7.0
05/2011
enable
During a synchronization interval, there are 2 to 8 synchronization
runs. This permits faster synchronization when the network load is
high.
disable
During a synchronization interval, there is only one synchronization
run.
4.14.22ptp v1 operation
Enable or disable the sending and receiving / processing of PTP
synchronization messages. Default is enable.
Format
ptp v1 operation {enable|disable}
Mode
Interface Config
enable
Port sends and receives/ processes PTP synchronization messages.
disable
Port blocks PTP synchronization messages.
To Next Page
Loading...
Need help?
General
