Hirschmann MACH 1000 Reference Manual

CLI L2P
Release 7.0 05/2011
4.17 Port monitor
385
4.17.2 show port-monitor <slot/port>
Use this command to display the Port Monitor details for the port.
Format
show port-monitor <slot/port>
Mode
Global Config
Port Monitor
Display if Port Monitor is enabled or disabled.
Link Flap
Display if Link Flap is enabled or disabled.
Crc-Fragment
Display if CRC Fragment is enabled or disabled.
Active Condition
Display the active condition for the port.
Possible values: Link-Flap, None.
Action
Display the action (disable port or send trap) to be triggered on the
port. Possible values: Disable-Port, Trap-Only.
Port Oper State
Display the link state of the port. Possible values: Up, Down.

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English