Hirschmann MACH 1000 Reference Manual

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.1 Spanning Tree Commands
425
5.1.26 spanning-tree mst vlan
This command adds an association between a multiple spanning tree
instance and a VLAN. The VLAN will no longer be associated with the
common and internal spanning tree. The instance <mstid> is a number
that corresponds to the desired existing multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID (1-4042).
This command accepts the value 0 for the mstid.
Format
spanning-tree mst vlan <mstid> <vlanid>
Mode
Global Config
U no spanning-tree mst vlan
This command removes an association between a multiple spanning tree
instance and a VLAN. The VLAN will again be associated with the com-
mon and internal spanning tree. The instance <mstid> is a number that
corresponds to the desired existing multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
This command accepts the value 0 for the mstid.
Format
no spanning-tree mst vlan <mstid> <vlanid>
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English