Hirschmann MACH 1000 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
515
Format
no radius server host {auth | acct} <ipaddress>
Mode
Global Config
6.1.25 radius server key
This command is used to configure the shared secret between the RADIUS
client and the RADIUS accounting / authentication server. Depending on
whether the 'auth' or 'acct' token is used, the shared secret will be configured
for the RADIUS authentication or RADIUS accounting server. The IP address
provided must match a previously configured server. When this command is
executed, the secret will be prompted. The secret must be an alphanumeric
value not exceeding 20 characters.
Format
radius server key {auth | acct} <ipaddr>
Mode
Global Config
6.1.26 radius server msgauth
This command enables the message authenticator attribute for a specified
server.
Default
radius server msgauth <ipaddr>
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English