CLI Commands: Security
534
6.1
Security Commands
CLI L2P
Release
7.0
05/2011
6.1.39 users login
This command assigns the specified authentication login list to the specified
user for system login. The <user> must be a configured <user> and the
<listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all ac-
cess to the interface from all CLI, web, and telnet sessions will be blocked
until the authentication is complete.
Note that the login list associated with the ‘admin’ user can not be changed
to prevent accidental lockout from the switch.
Format
users login <user> <listname>
Mode
Global Config
user
Enter user name.
listname
Enter an alphanumeric string of not more than 15 characters.
Note: when assigning a list to the 'admin' account, include an
authentication method that allows administrative access even when
remote authentication is unavailable (use 'authentication login
<listname> [method1 [method2 [method3]]]').
To Next Page
Loading...
Need help?
General
