Hirschmann MACH 1000

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.1 Spanning Tree Commands
409
5.1.11 spanning-tree bpduguard
This command sets the BPDU (Bridge Protocol Data Units) Guard on the
switch to enabled.
Default
disabled
Format
spanning-tree bpduguard
Mode
Global Config
U no spanning-tree bpduguard
This command sets the BPDU (Bridge Protocol Data Units) Guard to
disabled.
Format
no spanning-tree bpduguard
Mode
Global Config