CLI L2P
Release
7.0
05/2011
4.14
PTP - Precision Time Protocol
367
4.14.28ptp v2bc pdelay-interval
Configure the Peer Delay Interval in seconds {1|2|4|8|16|32}.
This interval is used if delay-mechanism is set to p2p.
Format
ptp v2bc pdelay-interval {1|2|4|8|16|32}
Mode
Interface Config
4.14.29ptp v2bc network-protocol
Configure the network-protocol {ieee802_3|udp_ipv4} of the
transparent-clock.
Format
ptp v2bc network-protocol {ieee802_3 | udp_ipv4}
Mode
Interface Config
4.14.30ptp v2bc v1-compatibility-mode
Set the PTPv1 Hardware compatibility mode {auto|on|off}.
Format
ptp v2bc v1-compatibility-mode {auto|on|off}
Mode
Interface Config
To Next Page
Loading...
Need help?
General
