CLI Commands: Base
158
4.7
Syslog Commands
CLI L2P
Release
7.0
05/2011
4.7 Syslog Commands
This section provides a detailed explanation of the Syslog commands. The
commands are divided into two functional groups:
D Show commands display spanning tree settings, statistics, and other in-
formation.
D Configuration Commands configure features and options of the device.
For every configuration command there is a show command that displays
the configuration setting.
4.7.1 logging buffered
This command enables logging to an in-memory log where up to 128 logs are
kept.
Default
enabled
Format
logging buffered
Mode
Global Config
U no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
To Next Page
Loading...
Need help?
General
