CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.5
Redundant Coupling
459
5.5.6 ring-coupling port
Configure the Ring Coupling's ports. Possible values are:
D control Enter the Ring Coupling's control coupling port in outband
configurations.
D local Enter the Ring Coupling's local coupling port.
D partner Enter the Ring Coupling's partner coupling port in single mode
configuration.
Default
none
Format
ring-coupling port <{control|local|partner}> <slot/
port>
Mode
Global Config
5.5.7 ring-coupling redundancy-mode
Configure the Ring Coupling's redundancy mode. Possible values are:
D extended Slave responds to a failure in the remote ring or network.
D normal Slave does not respond to a failure in the remote ring or network.
Default
extended
Format
ring-coupling redundancy-mode <{extended|normal}>
Mode
Global Config
To Next Page
Loading...
Need help?
General
