Hirschmann MACH 1000 Reference Manual

CLI Commands: Base
146
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.61 snmp-server enable traps chassis
Configures whether traps that are related to the chassis functionality of the
switch will be sent. These functions include the signal contacts, the ACA,
temperature limits exceeded, changes in the module map, addition or
removal of SFP modules, status of power supply has changed and the LLDP
and SNTP features. May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps chassis
Mode
Global Config
U no snmp-server enable traps chassis
This command disables chassis traps for the entire switch.
Format
no snmp-server enable traps chassis
Mode
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English