CLI Commands: Security
CLI L2P
Release
7.0
05/2011
6.1
Security Commands
495
6.1.2 authorization network radius
Use this command to enable the switch to accept VLAN assignment by the
RADIUS server.
Format
authorization network radius
Mode
Privileged EXEC
U no authorization network radius
Use this command to disable the switch to accept VLAN assignment by the
RADIUS server.
Format
no authorization network radius
Mode
Global Config
6.1.3 clear dot1x statistics
This command resets the 802.1X statistics for the specified port or for all
ports.
Format
clear dot1x statistics {<slot/port> | all}
Mode
Privileged EXEC
To Next Page
Loading...
Need help?
General
