Hirschmann MACH 1000 Reference Manual

384
4.17 Port monitor
CLI L2P
Release 7.0 05/2011
4.17.1 show port-monitor
Use this command to display the global Port Monitor settings.
Format
show port-monitor
Mode
Global Config
Port Monitor
Display if Port Monitor function is enabled or disabled.
Condition crc-fragment interval (seconds)
Display the condition of the CRC fragment interval in seconds.
Condition crc-fragment count
Display the condition of the CRC fragment count.
Condition link flap interval (seconds)
Display the condition of the link flap interval in seconds.
Condition link flap count
Display the condition of the link flap count.

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English