CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.4
Class of Service (CoS) Commands
91
4.4.10 mode dvlan-tunnel
Use this command to configure the port either as core port or access port.
This command is available for the RS20/RS30/RS40, RSB20, MS20/MS30,
RSR20/RSR30, MACH100, MACH104, MACH1000, MACH1040,
MACH4002-24G/48G (XG), OCTOPUS, OS20/OS30 devices.
Default
Disabled
Format
mode dvlan-tunnel {access | core}
Mode
Interface Config
access
Configure this port as a customer port.
core
Configure this port as a provider network port.
U no mode dvlan-tunnel
Use this command to configure the port as normal switch port and to
disable the DVLAN tunneling.
Default
Disabled
Format
no mode dvlan-tunnel
Mode
Interface Config
To Next Page
Loading...
Need help?
General
