CLI Commands: Switching
420
5.1
Spanning Tree Commands
CLI L2P
Release
7.0
05/2011
5.1.22 spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the
common and internal spanning tree. The max-age value is in seconds within
a range of 6 to 40, with the value being less than or equal to
"2 times (Bridge Forward Delay - 1)".
Default
20
Format
spanning-tree max-age <6-40>
Mode
Global Config
U no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and
internal spanning tree to the default value, i.e. 20.
Format
no spanning-tree max-age
Mode
Global Config