Hirschmann MACH 1000 Reference Manual

230
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.70 show storm-control
This command displays switch configuration information.
Format
show storm-control
Mode
Privileged EXEC and User EXEC
Ingress Limiting
May be enabled or disabled. The factory default is disabled.
Ingress Limiter Mode (MACH 4000 and PowerMICE only)
Sets the global mode for the ingress limiter. The factory default is:
Broadcasts only.
Egress Broadcast Limiting
May be enabled or disabled. The factory default is disabled.
Egress Limiting (all traffic)
May be enabled or disabled. The factory default is disabled.
802.3x Flow Control Mode
May be enabled or disabled. The factory default is disabled.

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English