Hirschmann MACH 1000 Reference Manual

CLI Commands: Base
84
4.4 Class of Service (CoS) Commands
CLI L2P
Release 7.0 05/2011
4.4.2 classofservice ip-dscp-mapping
This command maps an IP DSCP value to an internal traffic class.
The <ipdscp> value is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef.
Format
classofservice ip-dscp-mapping
<ipdscp> <trafficclass>
Mode
Global Config
ipdscp
Enter the IP DSCP value in the range of 0 to 63 or an IP DSCP
keyword (af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef).
trafficclass
Enter the traffic class to map the 802.1p priority (0-3).
U no classofservice ip-dscp-mapping
This command restores the default mapping of the IP DSCP value to an
internal traffic class.
Format
no classofservice dot1p-mapping
Modes
Global Config

Hirschmann MACH 1000 Specifications

General

Brand	Hirschmann
Model	MACH 1000
Category	Switch
Language	English