CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
235
to be supported by every switch.
GVRP may be enabled or disabled. The factory default is disabled.
Default Priority
The 802.1p priority assigned to tagged packets arriving on the port.
4.9.75 show voice vlan
Use this command to display the current global Voice VLAN Administrative
Mode.
Voice VLAN is a feature used to automatically separate voice and data traffic
on a port, by VLAN and/or priority. A primary benefit of using Voice VLAN is
to ensure that the sound quality of an IP phone is safeguarded from deterio-
rating when the data traffic on the port is high.
Format
show voice vlan
Mode
Privileged EXEC
Administrative Mode
Possible values: Disable, Enable
To Next Page
Loading...
Need help?
General
