Index
566
CLI L2P
Release
7.0
05/2011
Port monitor 383
port-monitor (Global Config) 388
port-monitor (Interface Config) 388
port-monitor action 391
port-monitor condition crc-fragment (Global
Config) 390
port-monitor condition crc-fragment (Interface
Config) 391
port-monitor condition link-flap (Global Config)
389
port-monitor condition link-flap (Interface Con-
fig) 389
ports
administrative mode 237, 238
frame acceptance mode 251, 252, 257
information 226
ingress filtering 253, 258
link traps 239, 240
physical mode 242
tagging 260, 262
VLAN IDs 259, 261
VLAN information 234
port-sec action 462
port-sec allowed-ip 463
port-sec allowed-ip add 463
port-sec allowed-ip remove 464
port-sec allowed-mac 464
port-sec allowed-mac add 465
port-sec allowed-mac remove 465
port-sec mode 462
Privileged Exec Mode 43
profinetio 123
Protocol Data Units. See PDUs
PTP - Precision Time Protocol 351
ptp clock-mode 355
ptp operation 356
ptp sync-lower-bound 357
ptp sync-upper-bound 357
ptp v1 burst 363
ptp v1 operation 364
ptp v1 preferred-master 358
ptp v1 re-initialize 358
ptp v1 subdomain-name 359
ptp v1 sync-interval 360
ptp v2bc announce-interval 365
ptp v2bc announce-timeout 366
ptp v2bc asymmetry 368
ptp v2bc delay-mechanism 366
ptp v2bc domain 362
ptp v2bc network-protocol 367
ptp v2bc operation 365
ptp v2bc pdelay-interval 367
ptp v2bc priority1 361
ptp v2bc priority2 361
ptp v2bc sync-interval 366
ptp v2bc utc-offset 362
ptp v2bc utc-offset-valid 362
ptp v2bc v1-compatibility-mode 367
ptp v2bc vlan 363
ptp v2bc vlan-priority 363
ptp v2tc asymmetry 368
ptp v2tc delay-mechanism 368
ptp v2tc management 369
ptp v2tc multi-domain-mode 369
ptp v2tc network-protocol 370
ptp v2tc operation 370
ptp v2tc pdelay-interval 371
ptp v2tc primary-domain 371
ptp v2tc sync-local-clock 373
ptp v2tc syntonization 371
ptp v2tc vlan 372
ptp v2tc vlan-priority 372
R
radius accounting mode 513
radius server host 514
radius server key 515
radius server msgauth 515
radius server primary 516
radius server retransmit 517
radius server timeout 518
reboot 301
reload 302
reset system command 301, 302
ring-coupling 456
ring-coupling config 457
ring-coupling net-coupling 458
ring-coupling operation 458
ring-coupling port 459
ring-coupling redundancy-mode 459
rmon-alarm add 187
rmon-alarm delete 187
rmon-alarm disable 188
rmon-alarm enable 188
rmon-alarm modify falling-event 192
rmon-alarm modify interval 190
rmon-alarm modify mib-variable 189
rmon-alarm modify rising-event 192
rmon-alarm modify sample-type 190
rmon-alarm modify startup-alarm 191
rmon-alarm modify thresholds 189
S
Schulungsangebot 573
script apply 167
script delete 168
script list 168