Huawei Quidway S2000 Series User Manual

Command Manual - Multicast
Quidway S2000 Series Ethernet Switches Chapter 2 IGMP Snooping Configuration Commands
2-5
Parameter
seconds: Specifies the port aging time of the multicast group member, ranging from
200 to 1000 and measured in seconds; By default, 260.
Description
Using igmp-snooping host-aging-time command, you can configure the port aging
time of the multicast group members. Using undo igmp-snooping host-aging-time
command, you can restore the default value.
This command is used to set the aging time of the multicast group member so that
the refresh frequency can be controlled. When the group members change frequently,
the aging time should be comparatively short, and vice versa.
For the related command, see igmp-snooping.
Example
# Set the aging time to 300 seconds.
[Quidway] igmp-snooping host-aging-time 300
2.1.6 igmp-snooping max-response-time
Syntax
igmp-snooping max-response-time seconds
undo igmp-snooping max-response-time
View
System view
Parameter
seconds: Maximum response time for a query ranging from 1 to 100 and measured in
seconds; By default, 10.
Description
Using igmp-snooping max-response-time command, you can configure the
maximum response time for a query. Using undo igmp-snooping
max-response-time command, you can restore the default value.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English