Huawei Quidway S2000 Series

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches Chapter 2 DHCP-Snooping Configuration Commands
2-1
Chapter 2 DHCP-Snooping Configuration
Commands
2.1 DHCP-Snooping Configuration Commands
2.1.1 dhcp-snooping
Syntax
dhcp-snooping
undo dhcp-snooping
View
System view
Parameter
none
Description
Using dhcp-snooping command, you can enable DHCP-Snooping function on the
switch to record users’ IP addresses. Using undo dhcp-snooping command, you can
disable this function.
By default, The switch is disabled to listen to DHCP broadcast packets and record
users’ IP addresses.
For the related command, see display dhcp-snooping.
Example
# Enable DHCP-Snooping.
[Quidway] dhcp-snooping