Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-18
1.3.4 build
Syntax
build name
undo build
View
Cluster view
Parameter
name: Cluster name with no more than 8 characters, including and only including
letters, numerals, subtraction sign “-” and underline “_”.
Description
Using build command, you can configure a cluster on a device. The name parameter
specifies the name of the cluster. Using undo build command, you can cancel a
cluster.
By default, all the devices supporting cluster are candidate devices.
After a cluster is created, the device on which the command is executed becomes the
administrator device and will be assigned with a fixed member number of 0.
This command can be executed on an administrator device or a command-capable
device. Using it on an administrator device, you can rename a cluster. Using it on a
candidate device, you can create a cluster.
Example
# Configure the current switch as the administrator device and specifies HUAWEI as
the cluster name.
[Quidway-cluster] build HUAWEI
1.3.5 cluster
Syntax
cluster

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English